dcd89fe86b2c4e497f2bfbdca509f83063d9879d
23
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  2GT-RichandClaude Opus 5
|
dcd89fe86b |
feat(ui): quieten the dashboard — mute checks, hide app noise, honest sparkline (v0.23.6-beta)
Closes #101, #103, #104, #106, #111. Partially addresses #96. A batch of signal-to-noise fixes reported together. Individually small; together they are the difference between a dashboard someone reads and one they learn to ignore. #101 — security heuristics can be muted A warning you disagree with and cannot dismiss discredits every other finding beside it. Cleartext API is the reported case: on a fleet reachable only across WireGuard, TLS adds nothing to the threat model, and the check is permanent noise. Missing input-chain firewall is the same on a switch behind a router — the message even says "confirm that is the case", while offering no way to record that you did. Checks can now be muted per device or fleet-wide. Muted findings are still listed, greyed and labelled, and excluded from the score — not hidden. Hiding them would make the posture unauditable, which is a worse failure than noise. #103 — the app's own requests are hidden from Recent activity Audit entries for writes made through the UI are noise from an operations point of view. Off by default now, with a toggle that names how many are hidden, remembered per browser since it is a viewing preference rather than fleet configuration. #104 — quick actions moved into the header strip Matching the Wireless page. "Things to handle" takes the full width it was already overflowing. #106 — map lookups can be turned off Geocoding hits nominatim.openstreetmap.org and the map pulls OSM tiles. On an isolated network those hang; everywhere else they disclose where your devices are to a third party, which the report understates. A maps_enabled setting stops both requests; stored coordinates are still shown as plain text so nothing is lost. #111 — the CPU sparkline says something It was drawn in one colour and auto-scaled to each device's own peak, so an idle device and a saturated one produced an identical picture. Now plotted against a fixed 0-100 scale, coloured by the band its peak falls into — a flat line low in the box is an idle device and looks like one. #96 — groundwork TX-retry figures come from CCQ, which only the legacy `wireless` driver reports, so the panel is permanently empty on a RouterOS 7 fleet. The wireless package each device runs is now recorded, and a capabilities endpoint answers the fleet-wide question. The panel is dropped and the density chart takes the full width when nothing can supply the data — and shown when nothing has been polled yet, rather than hiding a panel that may populate a minute later. Verified against the fleet: muting cleartext API moved a device's score from 87 to 90 with the finding still listed and marked. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 5
|
0258ee47dc |
fix(wireless): attribute CAP radios to the access point, not the controller (v0.23.1-beta)
Third round of #94 field testing. The placement bug survived v0.23.0 because the previous fix addressed the wrong mechanism. Cause A CAPsMAN controller mirrors every CAP interface locally, so a CAP's radio MAC legitimately appears on two devices: the CAP that owns the hardware, and the controller that mirrors it. The MAC index was single-valued and first-wins over an unordered UNION, so each radio landed on whichever row the database happened to return first. On the reporter's fleet six radios attached to a router with no radios at all, while their siblings attached correctly — the same access point appearing in two places, and liable to move between polls. v0.23.0 excluded the controller from *prefix* matches only. These are exact matches, so the exclusion never applied. Consecutive MACs on one physical AP resolving to different devices is what gave it away. Fix The index is multi-valued: a MAC maps to every device carrying it. A radio the controller reports as local:false lives on a CAP by definition, so the controller is rejected as a candidate at exact strength as well as prefix — an exact match against it only ever means the mirror. Attribution now runs through matchRadiosToDevices, which was previously tested but unused while the collector kept its own copy of the logic. With no radios left attributed to it, a controller that has none of its own stops appearing in the access point list, which was the reporter's follow-up point. SSID on provisioned interfaces A CAP holds no configuration, so its interface rows carry a generic name and a null SSID. The controller knows it, on its mirror of the same interface. Radios now record the provisioned SSID from there, and the table is driven by the controller's radio list rather than the CAPs' own rows — the controller is the only side that knows the SSID, channel and client count together. Band and frequency columns removed Both were empty while the channel column beside them read 5680/ax/eCee/D. The channel string already carries the band and the extension layout; parsing it properly is its own task, and half-parsing it produced empty columns next to populated ones. Requested by the reporter. 75 tests across the CAPsMAN and topology modules, including fixtures built from the reporter's MAC set: both radios of one AP resolve to that AP, order-independently, with a genuinely local radio still landing on the controller and an unknown CAP left unattributed rather than absorbed. Reproduced the mirror scenario against the local fleet before and after. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 5
|
82efcaa371 |
fix(wireless,topology): CAPsMAN write guards, MAC neighbour resolution, unified panel (v0.23.0-beta)
Closes #95. Addresses the second round of #94 feedback. Includes a regression introduced in v0.22.0. Wireless write paths were not CAPsMAN-aware (regression) v0.22.0 widened getAP() and the bulk-SSID selector to include cap/controller roles so a controller — normally tagged a router — would stop being invisible to the wireless section. Those same helpers gate the write endpoints, so the change also allowed writes to devices whose radios a controller owns. Reads needed widening; writes needed a guard, and did not get one. Five paths now refuse or skip provisioned radios: bulk SSID deployment, single interface create, interface edit, interface delete, and guest network setup. Delete was the worst of them — RouterOS will not remove a provisioned interface, but the cached row was deleted anyway, so it vanished from the UI until the next poll brought it back. The check is shared: partitionRadios() splits physical radios into locally controllable and controller-owned, assertNotCapsmanManaged() refuses an edit to a provisioned interface and names the controller. Neighbours identified only by MAC (#95) Topology resolved a neighbour to a managed device by IP address. A trunk port has no IP, so LLDP across one reports a MAC and an identity but no address — and those links stayed unresolved, drawing an external node beside the very device it already had on the map. Two directly connected devices appeared four times. Resolution by MAC now runs first, before address matching, because a MAC is hardware identity and unique fleet-wide where an address is not. This is the same join the CAPsMAN radio matching uses. CAPsMAN panel, from the reporter's testing - Radios and provisioned interfaces were two tables describing the same things from different angles; they are now one, per interface, with the access point, SSID, band, frequency, channel, clients and status. - Provisioning rules sit inside the configuration they apply. Rules referencing a configuration we did not collect are listed separately rather than dropped, since that usually means a stale reference. - The Wireless header reported zero clients while the Clients page reported 32: it summed the CAP-local count, which is empty under central forwarding. It now takes the greater of that and the controller's per-radio counts, so a controller that is also a CAP is not double-counted. - A remote radio could be attributed to the controller by the five-octet prefix fallback when the two shared a MAC block. Prefix matches now refuse the controller for a non-local radio; exact matches are still honoured. Radios tab followed device_type device_type is user-supplied tagging, and a router with radios had no way to display them. The tab now follows the detected wifi_role, which is a fact about the hardware. 48 tests on the CAPsMAN module, 22 on topology, including a fixture built from the device output in #95. Verified against the fleet: topology output unchanged, so MAC resolution merged nothing it should not have; guards correctly permissive on a standalone AP. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 5
|
e15556b601 |
fix(wireless): CAPsMAN panel corrections from field testing (v0.22.1-beta)
All five points raised on #94 after the reporter tested v0.22.0 against a live CAPsMAN deployment. Two were regressions in that release. Operating channel instead of a capability list (mine) current_channel was stored from /interface/wifi/radio's current-channels, which is every channel the radio supports rather than the one it is using. Measured on a wAP ax: 535 characters on the 2.4 GHz radio and 3037 on the 5 GHz one — the "two kilobytes of text" reported. /interface/wifi/monitor gives the operating channel (5500/ax/Ceeeeeee/D), and carries state, peer counts and TX power too, all now shown on the radio chip. Client counts that were zero everywhere (mine) The panel read registered_clients from the CAP's own wireless_interfaces rows, which are empty when traffic is processed centrally by the controller. Monitor's registered-peers is not the fix either, and testing caught that before it shipped: clients register on the virtual AP carrying the SSID, not on the physical radio, so monitor on a physical radio reports zero on a busy access point. On the test AP, wifi1 and wifi2 both read 0 while wifi3-wifi6 held all ten clients. Counts now come from the registration table, with each entry attributed to its radio by following master-interface up to the interface owning a radio-mac. That field requires /interface/wifi/print detail — it is absent from the plain listing. Verified against real hardware: ten registrations, attributed 8 and 2 across the two radios, none dropped. "no network" on remote interfaces The Network column resolved from the AP's own bridge ports. A CAPsMAN-provisioned interface is not a local bridge port, so nothing matched and the UI asserted the interface had no network at all. It now falls back to the datapath — inline fields or a named/.id reference — and labels the source. Where the datapath names no bridge it says "via controller" rather than claiming no network. Status labels "Serving Clients" claimed something the underlying field does not say: running means the radio is up, not that clients are connected. Now "Running" and "Enabled, not running". Table title "SSIDs / Wireless Interfaces" conflated two different things; the table lists interfaces, virtual and physical. Now "Wireless Interfaces". Guest WiFi on CAPsMAN-provisioned radios Raised by the reporter as an aside, and it was a real hazard already shipping. setupGuestNetwork created virtual APs locally on whatever physical radios it found, with no awareness that a controller might own them — the SSID would be ignored or overwritten on the next provision while the UI reported success. Provisioned radios are now skipped with an explanation, and if every radio is provisioned the setup is refused, pointing at the controller instead. 37 unit tests on the CAPsMAN module. No regression on a fleet without a controller: local bridge-port resolution unchanged, roles still correct. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 5
|
14bab24c7e |
feat(wireless): CAPsMAN awareness and read-only controller view (v0.22.0-beta)
Addresses #94, phases A and B. Write operations are deliberately out of scope. An access point provisioned by CAPsMAN holds none of its own wireless configuration, so /interface/wifi/print returns rows with the configuration.* and security.* fields absent. normalizeWifiInterface mapped nothing, stored nulls, and the UI rendered an AP with no SSID, security or band — indistinguishable from one that is simply broken. Phase A — stop showing blanks Devices are classified standalone / cap / controller / controller_cap from /interface/wifi/capsman and /interface/wifi/cap. Both toggles can be on: MikroTik supports a controller that also runs its own radios under itself, and the issue calls that case out, so it gets its own role. Provisioned interfaces are marked and labelled in the Radios tab with the controller's MAC and an explanation that the blank fields live on the controller. SSID, mode and channel are recovered from RouterOS's status line where present, so the AP is described rather than blank. Role is the signal, not missing data: an AP whose SSID is empty because the controller owns it looks identical to an unconfigured one, and only the toggle distinguishes them. A CAP can still hold locally-configured interfaces alongside provisioned ones, so per-interface state is checked rather than assuming the whole device. Phase B — read-only controller view Controllers now collect the radios they manage, named configurations, and provisioning rules, surfaced as a CAPsMAN panel on the Wireless page grouped by the access point each radio physically lives on. CAPs are matched to managed devices by radio MAC from the controller's own /interface/wifi/radio list, not by resolving addresses through neighbours as the issue proposed. A MAC is hardware identity and globally unique, so unlike an address it cannot mean two devices on two segments — the failure fixed in v0.20.1. A radio MAC often differs from the interface MAC in the final octet, so lookup falls back to a five-octet prefix while keeping the OUI exact. A CAP that is not a managed device is surfaced rather than hidden; that is usually the reason an AP appears to be missing from the fleet. The wireless section required device_type = 'wireless_ap' in five places, which hid a dedicated controller — normally classified as a router — from every wireless view. Collection was gated the same way. Both now include CAPsMAN roles, and the collector probes an unknown device once, records the role, and skips cheaply forever after. Not included Provisioning, config edits and interface enable/disable. A CAPsMAN configuration applies to every AP bound to it simultaneously, which is the fleet-wide version of the failure Change Guard exists to prevent. It needs the same prediction and revert treatment rather than being bolted on. Legacy /caps-man (pre-RouterOS 7) is a separate API tree and is not covered. Verified: API shapes probed against RouterOS 7.23 rather than taken from docs. 24 unit tests on the pure parsing and matching. No CAPsMAN hardware here, so the read path was exercised against a seeded controller with a local radio, a matched two-radio CAP and an unmanaged CAP; grouping, provisioning and SSID resolution all came out correct. Confirmed no regression on a fleet with no controller: roles detected correctly, no interface falsely flagged, wireless views unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 5
|
93ff1fbc53 |
feat(safety): Config Health audit, verified auto-revert, VLAN cache fixes (v0.20.0-beta)
Completes the lockout-prevention work: a standing audit for configurations
RouterOS accepts but that do not work, an empirical answer on /system history
undo, and corrections to the VLAN cache the editors are built on.
Config Health (new)
Eleven rules over a live snapshot, encoding MikroTik's documented Layer2
misconfigurations plus the latent lockout cases: IP or VLAN interface on a
bridge slave port, a bridged VLAN interface, a bond slave that is also a
bridge port, MTU above L2MTU, a multi-VLAN entry with untagged ports,
bridges competing for hardware offload, a port in no VLAN on a filtering
bridge, a PVID that frame-type=admit-only-vlan-tagged makes inert, a VLAN
interface whose VLAN the bridge is not tagged in, duplicate addresses, and
management that survives only on a dynamic entry. Each finding names the
consequence, the fix, how long it has been present, and the vendor doc.
Runs hourly, surfaces on the Security tab and the dashboard.
Calibrated against hardware: RouterOS 7 relocates an address off a bridge
slave port onto the bridge (actual-interface), so the stock defconf layout
works. Reporting that as critical would have fired on a default install; it
is informational unless RouterOS did not relocate it.
Change Guard: severed-connection handling
Proven on a CRS by deleting its own management address — the switch locked
itself out and self-restored unattended in ~3 minutes, twice.
That test exposed a real defect. withSafeApply treated any exception from
the apply step as "the change failed", disarming the guard and rethrowing.
But the most dangerous changes sever the connection carrying them, so the
call times out even though the change applied. The guard was stripping the
safety net off a device that had just gone silent, and reporting HTTP 500
"Read timeout" instead of telling the user the device was restoring itself.
Only luck saved it: the disarm needed the same dead connection.
Reachability now decides, not the exception. Unreachable leaves the revert
armed and returns auto_reverting; still reachable means a genuine failure,
disarmed so nothing reboots for nothing. committed_at is no longer stamped
on failed or reverted guards; resolved_at records completion instead.
/system history undo probe
probeUndoCapability tests the device rather than assuming. On 7.23.x over
the binary API: /system/history/print works, /system/history/undo does not
exist, /undo numbers= rejects the parameter, bare /undo works. Undo is
therefore untargeted, and cannot replace auto-revert since a dead-man switch
must fire after contact is lost. Binary restore stays the default.
VLAN cache correctness
- vlans keyed on (device_id, bridge, vlan_id); the old key collapsed the
same VID on two bridges
- vlan-ids ranges expanded instead of parseInt truncating "10-20" to 10
- both VLAN tables pruned, but only when the device returned an
authoritative list, so a failed read leaves the cache stale not empty
- bridge_vlan_entries.vlan_ids written and .tagged derived rather than
hardcoded false, which had left the port editor unable to see a trunk
- removeBridgeVlan matched by expanded VIDs; the ?vlan-ids= server filter
compares raw strings, so deleting one VID of a range silently no-opped
while reporting success. Multi-VLAN entries are refused in the route,
before the guard arms, since a mid-apply failure would cost a reboot
- interfaces.vlan_filtering promoted to a column
Membership is deliberately the STATIC tagged/untagged, never current-*.
These tables back the editors and updateBridgeVlan is remove-then-add, so
whatever is shown is written back; the effective view baked RouterOS's
dynamic PVID entries into saved configuration on every save. Analysis that
needs the effective view reads the device live. Extracted to pure functions
with tests, because that path was previously untestable inline.
Verified on four devices; 195 backend tests; all CI gates green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
2GT-RichandClaude Opus 4.8
|
23a45703a5 |
fix(ci): attach cause when rethrowing bridge-restore failure (v0.18.1-beta)
The backend Lint job failed on the new createBond error path: ESLint's
preserve-caught-error rule (in effect since the eslint 10.7 bump) requires a
rethrown error to carry the original. Pass `{ cause: err }`, which also makes the
underlying RouterOS failure visible in the error chain instead of only inside the
message string.
No behavior change beyond the richer error. Verified with the exact CI commands:
`npm run lint` and `npm run build` both exit 0, 133 backend tests pass, and the
redeployed build still guards correctly (guarded change commits, disabling the
management service is refused with 409).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
2GT-RichandClaude Opus 4.8
|
3a18cb1d91 |
feat(safety): Change Guard — device-side auto-revert for risky config changes (v0.18.0-beta)
A user change can sever the manager's own path to a device with no warning and no
way back. Most recently, deleting an *unused* bond on a switch took the whole
switch offline. This adds a safety net, and fixes the bug that caused that
specific incident.
Root cause of the bond incident (DeviceCollector.deleteBond):
- Slaves were re-added to the bridge ONLY when the bond itself was a bridge
member. For an unbridged bond the restore loop never ran, so the member ports
were released from the bond and left in no bridge at all — the ports stopped
forwarding and the switch dropped off the network.
- The restore in both deleteBond and createBond was wrapped in `.catch(() => {})`,
so a failed restore was swallowed and the route still returned 200 OK.
- Restores also dropped PVID, silently returning tagged ports to VLAN 1.
Now: port settings (PVID, frame-types, ingress-filtering, edge, horizon) are
captured and carried over, and restore failures are reported instead of hidden.
Change Guard (services/changeGuard/ChangeGuard.ts):
Before a risky change the device saves a restore point and arms a scheduler that
restores it after N seconds. The change is applied, then reachability is proven
on a NEW connection; success disarms the scheduler, failure leaves the device to
restore itself and come back. Because the restore point is created before the
scheduler, a binary restore rolls back to a config containing neither the
scheduler nor the change — self-cleaning, with no revert loop.
- Works entirely over the RouterOS API. This matters: every recovery artifact
today requires SSH, so devices without SSH credentials had no rollback target
at all (cf. #86).
- Modes: `binary` (exact restore incl. deleted interfaces, reboots) or `script`
(/import, no reboot but additive). Configurable via change_guard_* settings.
- Per-device Redis lock, `device_change_guards` audit table, and startup
reconciliation for guards left pending by a manager restart.
- Degrades gracefully: if protection can't be armed the change still runs and the
response says it was unprotected.
Wired into bond create/delete, bridge vlan-filtering, and /ip/service. Disabling
the service the manager is connected through is now refused outright (409) — the
mgmt-service signal already existed but was confined to the read-only posture
endpoint.
Also: replaces the bare confirm() on "Destroy Bond" with a ChangeGuardDialog that
explains the risk and the protection, and reports the outcome (including "the
device is restoring itself"). Fixes getAppSettings omitting
config_snapshot_enabled/interval, which made the v0.17.4 snapshot toggle a no-op.
Verified on real hardware (hAP-class switch): capability probe confirmed
/system/backup/save and scheduler add/remove work over the API; a guarded change
armed, applied, verified and committed leaving zero schedulers and zero files on
the device; disabling the api service was refused with 409. 133 backend tests
pass, including 7 guard state-machine tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
2GT-RichandClaude Opus 4.8
|
b6d161fc9d |
fix(wireless): prune interfaces deleted on the device; collect wireless on full sync (v0.17.5-beta)
Resolves #87 — virtual APs removed directly on the device (WinBox/WebFig) kept showing in the radios/interface lists, and neither refresh button cleared them. Two distinct bugs: 1. Stale rows. The collectors upsert every interface found on the device but never removed rows for interfaces that disappeared, so deleted radios lingered forever. Added a prune to collectWirelessInterfaces, collectInterfaces (same bug for deleted VLANs/bridges/bonds) and collectSecurityProfiles, deleting stored rows whose names are no longer present on the device. Safety: the prune only runs when the device list was fetched successfully. Fetches that previously swallowed errors into an empty array now return null and skip the prune, so a transient API failure can never be mistaken for "everything was deleted". /interface/print already throws on failure. 2. Full sync skipped wireless entirely. collectAll() — what POST /devices/:id/sync runs — never called collectWirelessInterfaces/collectSecurityProfiles, so a manual resync could not refresh radios or clear stale ones; only the 5-minute slow poll touched them. collectAll now collects wireless data for wireless_ap devices, making the fix reachable on demand. Verified on a live hAP-class AP: injected a ghost virtual-AP row, ran a sync, and the ghost was removed while all 7 real interfaces (and offline devices' rows) were retained. 114 backend tests pass. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 4.8
|
9dfb8a5333 |
feat: Guest WiFi, network intelligence, firmware orchestration, platform automation, api-ssl (v0.16.3-beta)
Guest WiFi (Hotspot): one-click captive-portal wizard that creates the guest SSID (virtual AP per radio), VLAN/bridge segregation + L3 VLAN interface, pool, DHCP, portal, rate-limited guest profile, and masquerade; vouchers with limits + printable sheets; live guest sessions; walled garden. Network intelligence: per-client device fingerprinting (vendor/hostname → category) with a persisted per-client override on the detail page; rogue/neighbor AP detection from stored AP scans (evil-twin flagging); Mist-style anomaly insights (client-count/CPU vs same-hour 14-day baseline + error bursts) in the Operations engine. Firmware orchestration: staged wave-based RouterOS rollouts (canary first) with pre-upgrade backup, reboot-ride-out, version verification, halt-on-failure, and scheduling; live per-device progress + cancel. Platform & automation: scoped API tokens (mtm_, read/write, hashed at rest, Bearer auth in requireAuth); outbound webhooks (12 events, HMAC-signed) fired from the alert pipeline + firmware orchestrator; scheduled email reports. api-ssl: RouterOSClient negotiates TLS on port 8729 and accepts RouterOS's default self-signed certs (rejectUnauthorized:false), so SSL-secured API devices connect without manual cert trust. Fixes #57. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
2GT-Rich
|
4e6c9f481e |
feat(wireless+ports): RF Health panels + physical per-port clients (v0.16.1-beta)
Wireless RF Health (fleet Wireless page + per-AP Radios tab):
- Channel usage map across 2.4/5/6 GHz with co-channel overlap; operating
channel resolved live from /interface/wifi/monitor on the wifi package
(auto-channel radios report no frequency in /print).
- AP deployment density: client RSSI distribution on the -90..-30 dBm scale
with a coverage-gap warning.
- AP radio TX retries histogram (0%->35%+) with band selector, derived from
per-client CCQ (new wireless_radio_quality InfluxDB series).
- WiFi connectivity success funnel (Association/Auth/DHCP) derived from logs.
Per-port connected clients (Ports tab):
- New card lists clients physically connected to a selected port (host/MAC/
IP/VLAN/connection time, linked to client pages).
- Distinguishes physical clients from the raw MAC table: uplink/trunk ports
are auto-detected (topology neighbor, multi-VLAN MAC spread, or high MAC
count) and show an uplink explainer + "view MAC table" disclosure instead
of every reachable MAC.
- Added clients.first_seen ("connected since"); set once, preserved across polls.
|
||
|
2GT-RichandClaude Opus 4.8
|
d79eb13119 |
feat(ui): theme-aware logo, dashboard bar graph, server-side client sorting (v0.14.1-beta)
UI/UX refinements on top of v0.14.0-beta, all validated on the test server: - Logo: new theme-aware compass iconmark (light/dark SVGs swapped via the dark class), sized to 45px; favicon updated to match. Wordmark casing corrected to "MikroTik Manager" (font size unchanged). - Navigation icons enlarged 15 -> 17px. - Dashboard: "Connected clients" line chart converted to a bar chart with a category axis + light downsampling so bars stay readably thick across ranges. - Clients: sorting is now server-side across the whole dataset (was sorting only the current page, so Type/others appeared to do nothing on a uniform page); table uses a fixed column layout + keepPreviousData so columns no longer jump or blank out when sorting/paging. Backend clients route gains whitelisted sort/dir params (safe numeric IP sort, deterministic tiebreaker). - Connections tab: surfaces the live /ip/firewall/connection/tracking state (on/auto/off pill) and clearer empty-state copy explaining auto-mode. Lint/typecheck/build/jest green in both workspaces; npm audit --audit-level=high clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 4.8
|
ee9c9ff9f7 |
feat(security): Security Center — firewall, NAT, bandwidth, posture, connections (v0.14.0-beta)
A dedicated top-level Security section plus a Meraki/UniFi-grade firewall built
on the full RouterOS feature set.
Security Center (new /security page)
- Fleet hardening scores, per-device posture list, and a "Common Findings"
rollup aggregating identical issues across the fleet
- "Manage" deep-links into the device's Security tab (?tab= support added)
Firewall & NAT (per device + in Security Center)
- Friendly rule builder: Allow/Drop/Reject chips, Any/Address/Address-List
pickers, port presets, connection-state chips, logging, live plain-English
preview
- Address lists as reusable objects, referenced from rules
- Rule reordering (/ip/firewall/{filter,nat}/move); per-rule hit counters
(print stats) with dead-rule highlighting + reset
- NAT wizards: Port Forward / Masquerade / 1:1 NAT + Custom
- Safe-apply lockout guard: backend 409 on an unscoped input drop/reject that
would sever management; UI confirms before forcing (detectLockoutRisk, tested)
Access & security
- Security posture audit: graduated, de-duplicated scoring that never proposes
disabling the management service the platform connects through (no self-
lockout); switch-aware input-firewall severity; service hardening table
- Bandwidth: simple-queue CRUD + one-click "Limit this client" on client detail
- Active connections viewer
These L3 features are available on all managed RouterOS devices (routers,
switches, APs), not gated by device type.
Backend: DeviceCollector address-list/move/stats/connections/queues/service
methods; device routes for all of the above; firewallSafety + firewallSummary
utils with unit tests (19 new).
Security: bump nodemailer 8 -> 9.0.1 to clear GHSA-p6gq-j5cr-w38f (our
createTransport/sendMail usage is unaffected by the advisory's raw-option path).
Verified live against RouterOS devices; lint/typecheck/build/jest green in both
workspaces; npm audit --audit-level=high clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
2GT-RichandClaude Fable 5
|
b841eb6e7b |
feat: NetFlow/IPFIX traffic analytics — per-client usage, app breakdown, built-in collector (v0.13.0-beta)
Adds Meraki-style traffic analytics powered by MikroTik Traffic Flow: Backend - Built-in NetFlow v9 + IPFIX collector (UDP 2055) with hand-rolled decoder, template caching, enterprise-field and IPv6 support - Flow attribution: client IP → MAC via the clients table, upload/download direction, NAT-duplicate records dropped - App classification by protocol/port (~25 categories: HTTPS, QUIC, DNS, SSH, Email, WireGuard, ...) - Deduplication: per-client best-exporter-per-window so flows crossing two managed routers are never double-counted - NAT-tolerant ingest: flows from sources matching no managed device (NAT / Tailscale subnet routers in path) are accepted as per-source unidentified exporters instead of silently dropped (netflow_accept_unknown setting) - Storage: InfluxDB client_traffic time-series (bounded cardinality via top-N fold) + Postgres client_traffic_daily rollups; daily retention purge - One-toggle device config push via RouterOS API (/ip traffic-flow + target) - New /api/traffic/* analytics endpoints + /api/network-services/netflow - docker-compose: NETFLOW_PORT (default 2055/udp) published on the backend Frontend - New Traffic page: fleet up/down chart, top talkers with client click-through, app-category donut, 1h–30d ranges - New NetFlow config page: collector settings, live ingest stats, per-device export toggles with health badges, NAT-source banner - Client detail: App Traffic card (auto-hides without data) - Clients page: sortable "Data (today)" column - Settings: NetFlow retention controls Includes 17 unit tests (decoder fixtures, dedup, attribution, classifier); verified end-to-end against live RouterOS devices. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Opus 4.8
|
367034c2d6 |
feat: config history (diff/rollback) + friendly backup scheduling (v0.12.3-beta)
Configuration History: - Per-device snapshots from the full RouterOS /export (.rsc) — config-only, so counters/operational state no longer cause phantom changes; deduped by content hash - New Config History tab: snapshot timeline, readable line diff, on-demand Capture (with honest 'no changes' feedback), one-click rollback via the linked .rsc backup - Snapshot and its backup are one artifact: badged 'Config Snapshot' on the Backups page, FK ON DELETE CASCADE keeps them in lockstep; delete is gated by a warning modal - New config_drift alert event (off by default); periodic snapshot poll with configurable cadence/retention (config_snapshot_interval_min/_retention) - New endpoints under /api/config-history (list/get/diff/capture/rollback/delete) Scheduled Backups: - Replaced the raw cron textbox in Settings with Frequency (Daily/Weekly/Monthly) + time + day pickers; cron is generated/parsed behind the scenes - Fixed cronMatchesNow to evaluate day-of-month/month/day-of-week (it previously only checked minute/hour, so weekly/monthly schedules ran every day) Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Sonnet 4.6
|
64bb8b1b93 |
feat: packet capture, bandwidth test (v0.11.5 Beta)
- Packet capture: RouterOS sniffer + SFTP download to PCAP for Wireshark analysis - Bandwidth test: RouterOS /tool/bandwidth-test with TX/RX Mbps result display - Both exposed in the Tools tab on device detail pages Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
2GT-RichandClaude Sonnet 4.6
|
6a4ab1fc5f |
feat: scheduled backups, availability tracking, PoE power metrics (v0.11.2 Beta)
P1 — Scheduled Backups - BackupService.createBackup() now accepts a `type` param (manual/scheduled) - PollerService: cronMatchesNow() parser + runScheduledBackups() + Redis 1h gate - Settings page: backup schedule toggle + cron expression input with examples P2 — Uptime/Availability Tracking - DB: device_availability table (went_offline_at, came_back_online_at, duration_seconds) - PollerService: inserts outage rows on offline detection, closes them on recovery - GET /api/metrics/device/:id/availability?range=30d endpoint - /api/metrics/summary now includes fleet 30-day uptime % - DeviceDetailPage: 30-day availability card (uptime %, outage count, longest outage) - DashboardPage HealthBar: Uptime 30d mini-stat P3 — PoE Power Draw Metrics - DeviceCollector.collectPoePower() queries /interface/ethernet/poe/monitor for switches - Writes poe_power measurement to InfluxDB (tags: device_id, port; fields: watts, current_ma, voltage_v) - GET /api/metrics/device/:id/poe endpoint (current per-port + 1h history) - SwitchPortDiagram: amber watt badge on PoE-active ports - HardwareTab: PoE budget section showing active ports and total watts Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
2GT-Rich
|
e5f630ef2f |
feat: add Syslog configuration to Network Services (v0.10.8 Beta)
New Syslog page under Network Services exposes RouterOS logging actions and routing rules with full CRUD. Logging actions define destinations (remote syslog server, memory, disk, echo); logging rules define which topics route to which action. Single Device and All Devices modes are functionally identical — All Devices applies changes across every online device in parallel and shows per-entry coverage badges indicating which devices have each action or rule. Toggle enable/disable works in both modes. Remote actions display address:port with facility/severity in a single Destination column; memory/disk/echo rows show no irrelevant remote fields. Syslog KPI card added to the Network Services overview. |
||
|
2GT-Rich
|
68d88d0306 |
feat: RouterBOOT upgrade support, update UI overhaul, discovery fixes (v0.10.6 Beta)
RouterOS vs RouterBOOT distinction: - Rename "Firmware Updates" → "RouterOS Updates" everywhere (Config tab, dashboard banner, devices list tooltip) to accurately reflect what is being updated - Add RouterBOOT bootloader upgrade support as a distinct operation: new DeviceCollector methods checkRouterboardUpgrade() and installRouterboardUpgrade() using /system/routerboard/print and /system/routerboard/upgrade - New API endpoints: POST /api/devices/:id/check-routerboard and POST /api/devices/:id/install-routerboard - Daily poller now also checks RouterBOOT upgrade status while already connected during firmware check cycle, with first-discovery alerts Config tab update panel: - Combine RouterOS and RouterBOOT into a single "Software & Firmware Updates" card with two subsections separated by a divider - Pre-populate both sections from stored DB state on load — no longer requires a manual "Check" click to see a known pending update - Enforce update order: when both are pending, show a blue info banner explaining RouterOS must be installed first, and disable the RouterBOOT "Upgrade & Reboot" button until the RouterOS update clears - Fix GET /api/devices/:id to include firmware_update_available, latest_ros_version, routerboard_upgrade_available, upgrade_firmware_version (these were missing from the detail endpoint) Dashboard & devices list: - Combined amber banner now shows two distinct rows: RouterOS (N) with device links and RouterBOOT (N) with device links — one dismiss for both - Devices list: amber ArrowUpCircle = RouterOS update, blue Cpu icon = RouterBOOT upgrade, each with distinct tooltips - Fix GET /api/devices (list) to include routerboard_upgrade_available and upgrade_firmware_version (these were missing, causing RouterBOOT notifications to never appear on the dashboard) DB migration: - Add routerboard_upgrade_available BOOLEAN DEFAULT FALSE - Add upgrade_firmware_version VARCHAR(20) Discovery system fixes: - Fix duplicate entries: replace single-key (mac || ip || identity) dedup with three cross-referenced indexes so a neighbor seen via LLDP by one device and via MNDP by another always merges into one row - Fix offline devices persisting: handleDeviceFailure now deletes topology_links for the offline device (same pattern as clients) - Add periodic stale-link sweep every 15 min that removes topology_links rows older than 20 min as a safety net for devices that go offline without cleanly triggering handleDeviceFailure |
||
 Denis
|
30bf691596 |
feature(devices,topology,tz): devices bulk-add, duplicate safety, and firmware/timezone fixes
Squash-merge of PR #28 from @denis-ev. All three review blockers addressed: encryption key management documented, string truncation replaced with skip+warn validation, and undefined return on duplicate merge fixed with proper 500. Local test stack verified against cloned prod DB — migrations, new features, and backend all clean. |
||
|
2GT-Rich
|
5d96503832 |
Add Jest unit test infrastructure and initial test suite
Sets up Jest + ts-jest for the backend and adds 47 tests across 5 suites covering crypto utilities, OUI vendor lookup, auth middleware, AlertService dispatch/cooldown logic, and DeviceCollector uptime parsing. |
||
|
2GT-Rich
|
0a1ae97523 | Fixed NTP & DNS server activation bug. | ||
|
Rich Teslow
|
6b0fc9fdf1 | Initial commit baby! |